Setup and Fire Up Your Glass Quicker!
Prevents Glass Movement Between Glass Layers Before Firing in Your Kiln
NO Days Glass Fusing Adhesive Squares are a new quick curing easy-to-use adhesive designed for setting up your glass layers before fusing your glass together in a kiln. The unique benefit of the NO Days Glass Fusing Adhesive is evident in its ability to be quickly installed to prevent movement in your glass layers when handling your design (before placing your glass into your kiln) and leave NO RESIDUE after fusing!
All you need to apply is a standard heat gun or embossing heat tool.
NO RESIDUE – NO Days Glass Fusing Adhesive Squares was designed to fully burn off leaving no residue each and every time inside your fused glass when firing up in your kiln. Liquid adhesive take time to cure and do not bond your glass layers securely enough to prevent movement when handling before firing your glass in your kiln. Liquid Adhesive are often messy to work with and leave traces of residue after your glass has been fused. With NO Days Glass Fusing Adhesive Squares, your glass design will be free of residue leaving you with nothing but your glass fusing art.
NO Days Glass Fusing Adhesive Squares is available in easy-to-use 1.00” x 1.00” (25mm x 25mm) in packs of 50, 100, and 250.
4 Easy Steps to Apply No Days Glass Fusing Adhesive Squares:
* (The example below represent fusing 2 layers of glass together)
1. Place your NO Days Glass Fusing Squares throughout your bottom layer of glass
2. Place your top layer of glass on top of your NO Days Glass Fusing Adhesive Squares
3. With your heat tool, apply heat to top layer of glass in areas where you placed your squares to allow the NO Days Glass Fusing Adhesive Square to melt and begin to flow. Allow the glass to briefly cool to fully cure. (Note: NO Days Glass Fusing Adhesive flows at 160 F / 71 C).
4. Place your glass layers bonded with the NO Days Glass Fusing Adhesive into your Kiln. When the glass is fused, the NO Days Glass Fusing Adhesive will burn off leaving your fused glass design with NO RESIDUE!
NO Days Glass Fusing Adhesive is the ideal solution for setting up your glass layers before fusing your glass design in your kiln. Setup and Fire Up your glass quicker with NO Days Glass Fusing Adhesive!
For more information, contact toll free 1-888-989-3832 or to order, click here.
*Patent Pending
Heating Tool Required for Application
NO Days Glass Fusing Adhesive is a trademark of Streuter Technologies, Inc.
|
Glass Fusing 
